In order to protect the drilling equipment and achieve the best working results when using the drilling machine, we should pay attention to some instructions. The first is to choose the right bit or the drill according to the target. The corresponding drilling rate is chosen according to the material being drilled. If the drilling speed is too fast, the drill bit will heat up, and some low-melting materials will soften, causing damage to the target. If the drilling speed is too slow, it will cause the adhesion of soft materials, or even cause the machine to entangle. The number of passes to the drill is determined based on the required depth and bore diameter of the borehole. The drilling machine belongs to the equipment of high-speed rotary feeding, so it needs good protection. On the one hand, it has good protection for the machine, on the other hand, it is very good for personnel safety.
The most worn wear of the drill is the drill bit. The sharpness of the drill determines the processing level of the target and determines the progress of the machining. Therefore, it is necessary to select a high-quality wear-resistant drill bit, and after a certain period of time, the drill bit is changed or the drill bit is ground so that the drill bit has a high working state. During the operation of the equipment, it is inevitable that a lot of dust will enter the machine. Therefore, the equipment should be lubricated frequently, and the lubricating oil should be added at certain intervals.
The protection of the equipment requires every employee to take care of it. If there is no good protection for the equipment, it will affect the work efficiency in the work, and even affect the quality of the product, affecting the credibility of the customer. Drilling machines, especially fully automatic drilling machines or high-precision fully automatic drilling machines, require regular maintenance and small problems to avoid damage to the machine in the event of a major problem and affect the progress of the work.